When you are not satisfied with your Nissan MARCH(2010-2012) obsolete factory radio, you can keep reading this article patiently to see if you can install a new car radio by yourself under the following installation guide. In fact, there are minor differences among various car radios, so if you know how to install a car radio for 2010-2012 Nissan MARCH, you able to install other car radio in all probability.

2010 2011 2012 Nissan MARCH android dvd gps radio after installation

2010 2011 2012 Nissan MARCH android dvd gps radio after installation

 

Precautions for this installation:

1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2.Please make sure that all fastened wires are isolated with electrical tape.

3.Please make sure the ignition is off to avoid short circuit.

4.Please prepare a lever and a screwdriver before the removal and the installation.

5.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd- 400

 

2010 2011 2012 Nissan MARCH car radio installation guide

1. Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside.

1-1. Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside

1-1. Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside

1-2

1-2

2. Remove screws that fixed the radio on the dashboard.

Remove screws that fixed the radio on the dashboard

Remove screws that fixed the radio on the dashboard

3. Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.

Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio

Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio

4. Unplug the connectors at the back of the factory radio.

4-1.Unplug the connectors at the back of the factory radio

4-1.Unplug the connectors at the back of the factory radio

4-2

4-2

5. Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure.

6. Put the new Seicane radio into your car, you should check whether your connections are correct, and you’d better have a tidy for the cables.

7. If everything is OK, firm screws into their original place.

8. Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio.

 

Don’t worry if there is something wrong with your installation. You should seek help from your dealer or a professional to that problems can be resolved. As a suitable car radio is the key factor before the installation, you have to pay more attention to it. If you are still searching for an ideal one, you may check out the link below for more details.

http://www.seicane.com/android-aftermarket-car-stereo-navigation-system-for-2010-2011-nissan-march-with-dvd-player-radio-3g-wifi-bluetooth-mirror-link-hd-1024-600-touch-screen-obd2-dvr-rearview-camera-tv-usb-sd-1080p-video-s167043

This up-to-date car radio for a 2010 2011 2012 Nissan MARCH comes with many practical and entertaining features, including 3D GPS Navigation, Bluetooth, Rearview Camera, Wi-Fi, DVD, FM/AM Radio, USB/SD, etc. These features in diversity are not only for your convenience but also for your enjoyment, which all provide you an unforgettable driving experience. Wish you like it and enjoy your life.

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>

Post Navigation