What do you think is the effective way to make you have great fun on all trips? In my opinion, to install a car stereo can help you realize your dream. And it is not difficult to install a new car stereo on your own. With some installation experience and a correct guide, you can easily achieve the installation. Here shows a detailed 2017 Toyota Corolla (LHD) car stereo installation instruction from Seicane. If you also have the same dashboard, you can follow the instruction step by step.
2017 Toyota Corolla (LHD) Stereo after installation
Before and during installation, you should notice:
1.Before connecting, please make sure the ignition is off to avoid short circuit.
2.Ensure connect the yellow and red power cable at last.
3.Ensure that all loose wires are isolated with electrical tape
4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5.Ensure that all ground is connected to the same place.
6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2017 Toyota Corolla (LHD) car stereo installation instruction
1. Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside.
Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside
2. Remove screws that fixed the radio on the dashboard.
Remove screws that fixed the radio on the dashboard
3. Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.
Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio
4. Unplug the connectors at the back of the factory radio.
Unplug the connectors at the back of the factory radio
5. Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure.
Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure
6. Put the new Seicane radio into your car, you should check whether your connections are correct, and you’d better have a tidy for the cables.
7. If everything is OK, firm screws into their original place.
If everything is OK, firm screws into their original place
8. Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio.
Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio
That’s all about how to removal the factory radio and install the new car radio for 2017 Toyota Corolla (LHD). If you have any questions, you can consult your dealer or seek help from a professional. To make sure your upgrading is successful, you need to buy a suitable car stereo for your car. If you don’t know how to pick a suitable car stereo, you can refer to this up-to-date Seicane 2017 Toyota Corolla (LHD) car stereo.
Based on the advanced Android 5.0.1 operation system and a powerful 1.6GHz A9 Quad-core CPU, the performance of this 2017 Toyota Corolla (LHD) car stereo to operate and process the database is greatly improved. With the help of the high-end 3D GPS navigation system, you are able to be provided with the best route option to reach your destinations without mistakes. By linking your Bluetooth-enabled mobile phones with this stereo, you can freely get access to hands-free calls and streaming music keeping your hands on the steering wheel control for a safe driving. Wish you like it and good luck to you!
Recent Comments