If you are desired of having a more comfortable and convenient car interior environment as well as an unforgettable and relaxing driving experience, you might as well think about replacing your factory radio with a brand new multifunctional car radio. And to have a general understanding of the removal and installation, you can refer to a related installation instruction. The following is an amazing 2012 2013 2014 KIA SOUL car radio installation instruction from Seicane. If you own the same or similar dashboard, you can refer to this instruction carefully.
Precautions for this installation:
1. Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.
2. Please make sure that all fastened wires are isolated with electrical tape.
3. Please make sure the ignition is off to avoid short circuit.
4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2012 2013 2014 KIA SOUL car radio installation instruction
1. First remove the vent panel on the top of the radio with a pry tool, and set it aside.
2. Then remove the trim panel around the radio with a pry tool, and set it aside.
3. Unscrew three screws as the picture shows.
4. Pull out the air condition control without disconnect the harness behind it.
5. Unscrew four screws holding the radio in dashboard.
6. Unplug the connectors behind the radio.
7. Pull out the original car radio.
8. Disconnect all connectors at the back of the original car radio.
9. Check all the accessories for the new Seicane car radio.
10. Connect the harnesses to the back of the new Seicane car radio.
11. Connect the Seicane car radio to your original car radio ‘s plugs.
12. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
13. Put the new Seicane car radio into the dash.
14. Put everything into their original place. All the installation is done.
Above is the whole removal and installation process for a 2012 2013 2014 KIA SOUL car radio. If you have any doubts, please feel free to contact your dealer, communicate with someone experienced or turn to a professional for help. And if you are afraid of making damage to either your car radio or your car, you’d better go to a car radio upgrade center and ask a professional technician to help you install the new ca radio. Anyway, before installation, it is essential for you to select an ideal car radio for your car. Here I would like to recommend a remarkable 2012 2013 2014 KIA SOUL car radio from Seicane to you. For more details, please click:
Specially designed for 2012 2013 2014 KIA SOUL, this remarkable car radio is running on the most advanced and stable Android 7.1 operation and a powerful quad-core CPU processor which can provide you with a brand new operation experience thanks to its higher performance and configuration.
Under the guidance of text-to-speech provided by the 3D GPS navigation system of high accuracy, you are able to know where you are now and navigate to your desired destinations. And while navigating, you can freely listen to your favorite music which is played under GPS mode thanks to this unit’s dual zone function, and the music will automatically switch to GPS voice.
And through the Bluetooth connection between your Bluetooth-enabled mobile phone and this car radio, you are able to dial, answer, reject and mute Bluetooth hands-free phone calls, and you can also enjoy music streaming from your phone.
Wish you like this unit and good luck to you!
Recent Comments