Nowadays, there is a prevailing view that for enjoying convenience and enjoyment in car, one of the straight ways is to upgrade a car radio with not only practical but also entertaining features. In fact, to install a car radio for a car on your own requires not many professional skills; every car owner can achieve it individually under a correct installation guide. The following is a 2012-2015 NISSAN SYLPHY car radio installation guide. If you are going to install a 2012-2015 NISSAN SYLPHY Bluetooth Car Radio, this article is worth for you reading.
2012-2015 NISSAN SYLPHY Bluetooth Car Radio after installation
Please notice before the installation:
1.Please apply the parking brake and remove the negative cable on the vehicle battery before the removal to ensure safety.
2.A lever and a screwdriver need to be prepared before the installation.
3.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2012-2015 NISSAN SYLPHY bluetooth car radio installation guide
1. Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside.
Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside
2. Remove screws that fixed the radio on the dashboard.
Remove screws that fixed the radio on the dashboard
3. Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.
Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio
4. Unplug the connectors at the back of the factory radio.
Unplug the connectors at the back of the factory radio
5. Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure.
Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure
6. Put the new Seicane radio into your car, you should check whether your connections are correct, and you’d better have a tidy for the cables.
7. If everything is OK, firm screws into their original place.
If everything is OK, firm screws into their original place
8. Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio.
Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio
Wish the above installation guide can be helpful for you. Whatever problems you have, you can seek help from your dealer or a professional. Anyway, the key point about the successful installation is that you must have a car radio which fits well with your car. If you are still searching it online, I would like to recommend a 2012-2015 NISSAN SYLPHY Bluetooth Car Radio from Seicane to you. For more details, please click:
This intelligent car radio is specially designed for you to replace your factory radio in 2012-2015 NISSAN SYLPHY. When you make full use of the Bluetooth technology, without keeping your hands off the steering wheel, hands-free calls and streaming music are both available for you when you simply pair your Bluetooth-enabled mobile phone with this car radio, which guarantees a safe and happy driving in a large degree. Besides, the high-precision 3D GPS navigation system can help you find the correct ways to your destinations. If you like this car radio, don’t hesitate to add it to your cart!
Recent Comments