Under the influence of pandemic and the war between Russian and Ukraine, many people has suffered from the financial loss and the life quality dropped down to some extent.Undoubtedly, it’s best for most people to install stuff by themselves who are reluctant to go out at this time, no exceptions for car touchscreen unit installer. Suppose you are the user of Jeep Wrangler, you may choose to DIY installation rather than buying service outside as it can reduce your budget and lower the chance of contracting disease. To accomplish the best purpose, there is an essay of Aftermarket Jeep Wrangler radio and speaker system wrote by some experienced person that presents you the clear ways of replacement.

top

Before installation, you should pay attention to some important tips. First of all, you can disconnect the power and prepare some tools such as lever before the removal and the installation. Secondly, you should keep all the separate parts from the car and take great care of the dashboard to avoid scratching it during its detachment and installation.

Last but not least, you should keep handy any parts from the car and make use of all the original screws from the car as much as possible so that each related part of the unit can be fixed securely.

2011-2017 JEEP Wrangler car radio installation guide

Step 1. Remove top tray and bolt underneath.

图片1

Step 2. remove another bolt behind the switches

图片2

Step 3. Pry off the panel below the steering wheel column to access the two more bolts on either side.

图片3

Step 4. Remove the four bolts around the head unit.

图片4

Step 5. Pry off the side panels.

图片5

Step 6. Remove glove box and lower panel (passenger’s side).

图片6

Step 7. Front speaker removal (passenger’s side).

图片7

Step 8. Unbolt the lower dash panel then pull out speaker from below (driver’s side).

图片8

Step 9. Replacing the tweeters.

图片9

Step 10. Sound bar speaker removed and polyfill fiber inserted.

图片10

Step 11. Power wire and fuse connected to the battery.

图片11

Step 12. Bolting down the ground wire.

图片12

Step 13. Amplifier and subwoofer installed to the trunk.

图片13

Through these 13 steps, most of you should have confidence to complete this installation by yourself. Nevertheless, there is no way to solve all the problems once and for all. Therefore, you need to find some useful and helpful information to meet your need. When you meet the difficulties during this process, you can ask for the technician for help or your car dealer who can offer you the best advice.

If you find they can’t answer your questions in time, you can surf the internet at once such as Seicane, which has focused on making car receiver for many years and here is the link of Jeep Wrangler touchscreen unit of it, making good performance and owning the best performance these years. On the Seicane official website, you can also get the good quality after-sale service as well as 3-year warranty. If you want to get more details or contact them, please leave your comment or visit it now.

end

 

 

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>

Post Navigation