If you want to not only catch up with the trend but also pursue a better in-car life as well as a brand new driving experience, it is a very wise choice for you to replace your factory radio with a new aftermarket car radio. Today I would like to share a detailed installation instruction for car radio from Seicane with you. If you have a 2014 2015 Mazda 3 Axela, you can take the following instruction for a reference before you start your installation.
2014 2015 Mazda 3 Axela Bluetooth DVD Stereo after installation
Some tips before the installation:
1.Please disconnect the power before the installation.
2.Please prepare a lever and a screwdriver before the removal and the installation.
3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.
4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2014 2015 Mazda 3 Axela installation instruction
1. Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside.
Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside
2. Remove screws that fixed the radio on the dashboard.
Remove screws that fixed the radio on the dashboard
3. Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.
Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio
4. Unplug the connectors at the back of the factory radio.
Unplug the connectors at the back of the factory radio
5. Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure.
Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure
6. Put the new Seicane radio into your car, you should check whether your connections are correct, and you’d better have a tidy for the cables.
7. If everything is OK, firm screws into their original place.
If everything is OK, firm screws into their original place
8. Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio.
Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio
The above is the installation instruction for a 2014 2015 Mazda 3 Axela Bluetooth DVD Stereo. If you encounter any problems you cannot solve, you can contact with your dealer for seeking valuable advice or turn to a professional for help. To make sure you can replace a car radio with great success, it’s quite important you have a right replacement for your car; here I’d like to share a great 2014 2015 Mazda 3 Axela Bluetooth DVD Stereo from Seicane with you as a reference. For more details, please click:
This intelligent 2014 2015 Mazda 3 Axela Bluetooth DVD Stereo, based on the advanced Android 5.0.1 operation system and featured with a Quad-core CPU, can provide you with a smooth and stable performance. With the high-precision GPS navigation system, you won’t get lost no matter you are traveling around the country or looking for some service areas through turn-by-turn direction and voice prompts. Besides, to sync your cell phone with this car radio, you are able to dial, receive or reject hands-free calls as well as enjoy bluetooth music streaming from your enabled mobile phone with your hands on the steering wheel control. If you like this car radio, hurry up to add it to your cart!
Recent Comments