When you driving out with your families or friends, to keep them entertained all the way, you can upgrade your factory radio with a brand new car radio which can support almost all the prevailing multimedia formats, so that you can play whatever you want to amuse your passengers. To help you install your new car radio, I’d like to share a detailed installation guide about a 2014 2015 Honda City Car Audio with you. If you own the same vehicle type, you may refer to the following installation guide.
2014 2015 Honda City Car Audio after installation
Before and during installation, you should notice:
1.Before connecting, please make sure the ignition is off to avoid short circuit.
2.Ensure connect the yellow and red power cable at last.
3.Ensure that all loose wires are isolated with electrical tape
4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5.Ensure that all ground is connected to the same place.
6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400
2014 2015 Honda City car radio installation guide
1. Remove the bottom panel with a plastic removal tool and then unplug the connector behind.
Remove the bottom panel with a plastic removal tool and then unplug the connector behind
1-1
2. Remove screws below the radio with a screwdriver.
Remove screws below the radio with a screwdriver
3. Remove the panel on the left of the radio.
Remove the panel on the left of the radio
4. Release the panel one the right side of the radio.
Release the panel one the right side of the radio
5. Take out the original radio, please use a plastic removal tool if necessary.
Take out the original radio, please use a plastic removal tool if necessary
6. Disconnect the connectors at the back of the radio.
Disconnect the connectors at the back of the radio
7. Check all the accessories for the new Seicane car radio.
Check all the accessories for the new Seicane car radio
8. Connect the harnesses to the back of the new Seicane car radio.
Connect the harnesses to the back of the new Seicane car radio
9. Connect the Seicane car radio to your original radio’s plugs.
10. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
11. Put the new Seicane car radio into the dash.
12. Put everything into their original place. All the installation is done.
Wish these steps can help with your installation. Before the installation, please make clear every detailed step. If you have anything you cannot understand, you may seek advice from your dealer or ask someone experienced for help. Anyway, before the installation, it is very crucial for you to check whether your new car radio fits well with your car or not. If not, you’d better quit it and purchase another one. Here I would like to share a marvelous 2014 2015 Honda City Car Audio with you. For more details, please click:
This intelligent Seicane 2014 2015 Honda City Car Audio, featured with super large 10.2 inch HD 1024*600 multi-touch screen, will provides users with the excellent experience to enjoy the simple operation and clear display in cars. With the help of the 3D GPS navigation system of high accuracy, you are capable of having the best route option to reach wherever you want to go accurately. While as for entertainment features, you can utilize its function as a multimedia player to play whatever you want to keep both you and your passengers pleasant all the way.
Recent Comments