If you have a car, you must notice that your factory radio is too outdated to be compatible with some modern features after a long-time use. Under this circumstance, it is very necessary for you to replace your factory radio with a new aftermarket car stereo since an ideal car stereo can be compatible with a lot of comprehensive features to upgrade your car’s capacities to some extent. If you are going to make the replacement by yourself, then you can find a correct installation guide to help you. This passage aims to introduce an installation guide on a 2000-2006 TOYOTA COROLLA EX car stereo. If you have the same or the similar dashboard, you can take it as reference.
Some tips before the installation:
1.Please disconnect the power before the installation.
2.Please prepare a lever and a screwdriver before the removal and the installation.
3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.
4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2000-2006 TOYOTA COROLLA EX car stereo installation guide
1. Remove two trim panels at each side of the center console and set it aside.
2. Remove the top panel and set it aside.
3. Remove 4 screws holding the unit with a Phillips screwdriver.
4. Gently take out the panel on the radio interface.
5. Take out the radio and disconnect cables at back of it.
6. Check all the accessories for the new Seicane car stereo.
7. Connect the harnesses to the back of the new Seicane car stereo.
8. Connect the Seicane car stereo to your original car radio’s plugs.
9. Put the new Seicane car stereo into the dash.
10. Turn on the new Seicane car stereo and have a comprehensive check if it works well.
11. Install 4 screws back to their original position.
12. Install the trim panel back to its original place.
Now do you know how to remove and install the new car stereo for 2000-2006 TOYOTA COROLLA EX? If you have no ideas, please feel free to contact your dealer for seeking advice or turn to a professional for help. Or you can directly arrange a professional technician to help you install the new car stereo. Anyway, before installation, please check the compatibility between your new car stereo and your car. If your new car stereo is not compatible enough, it is suggested that you should quit it and buy an ideal one. Here I would like to recommend a remarkable 2000-2006 TOYOTA COROLLA EX car stereo from Seicane to you. For more details, please click:
This car stereo is integrated with a wide range of comprehensive features, mainly including 3D GPS navigation, FM/AM radio tuner, Bluetooth hand-free calls, Bluetooth streaming music, DVD player, file management, steering wheel control, SD card connection, etc. By taking full advantage of these features, you are able to have a brand new and wonderful driving experience. Here I’d like to take 3D GPS function and Bluetooth function as examples.
Even you don’t have a good sense of direction, with the help of the 3D GPS navigation system of high accuracy, you can easily locate where you are and navigate to your desired destinations according to turn-by-turn directions and voice prompts.
Under the wireless Bluetooth technology, you can pair your Bluetooth-enabled mobile phone with this car stereo. So you are able to dial, answer, reject and mute hands-free calls as well as listen to Bluetooth streaming music from your mobile phone without taking your hands off the steering wheel.
If you like this unit, just don’t forget to add it to your shopping cart. Good luck to you!
Recent Comments