If you are not satisfied with your factory radio, you can replace it with a new aftermarket car stereo. If you plan to finish the replacement process by yourself, you can find a step-by-step installation instruction to help you deal with the installation, which can help you reduce budget and gain sense of achievement. Here I would like to share a detailed 2008-2014 TOYOTA Sequoia car radio installation guide from Seicane with you. Wish it is helpful for you to some extent.
Precautions for this installation:
1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.
2.Please make sure that all fastened wires are isolated with electrical tape.
3.Please make sure the ignition is off to avoid short circuit.
4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2008-2014 TOYOTA Sequoia car radio installation guide
1. The original car radio.
2. Pry around the panel on the left of the original car radio with a lever, and release it.
3. Remove the bottom pocket with your hands.
4. Remove the air conditioner control with a lever.
5. Remove four mounting screws holding the original car radio in place with a screwdriver as pictures below show.

Remove four mounting screws holding the original car radio in place with a screwdriver as pictures below show
6. Take the original car radio out of the dash with your hands.
7. Disconnect all connectors at the back of the original car radio.
8. Check all the accessories for the new Seicane car radio.
9. Connect the harnesses to the back of the new Seicane car radio.
10. Connect the Seicane car radio to your original car radio’s plugs.
11. Turn on the new Seicane radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
12. Put the new Seicane radio into the dash.
13. Put everything into their original place.
Don’t worry and just calm down if you encounter any problems before or during the installation process. In that case, you can contact your dealer for seeking advice or turn to a professional for help. For avoiding damage to your car radio or your car, you can directly arrange a professional technician to help you install the new car radio. If you are still looking for a suitable car radio which can work well in your car, here I’d like to recommend an amazing 2008-2014 TOYOTA Sequoia car radio from Seicane to you. You may check out the following link for more details.
Based on the intelligent Android 6.0 operation system, a high-quality powerful 8-core 1.5 GHz RK-PX5 A53 processor and 32GB Inand flash as well as 2GB RAM, the performance of this car radio to operate and process the database has been greatly enhanced.
When you turn on GPS function, you will get access to a lot of features, including current location, speed, mileage, landmark building display, 3D street view, destination search and turn-by-turn voice directions. Therefore, it is much easier for you to find the right way to reach your desired destinations without making mistakes.
By pairing your Bluetooth-enabled mobile phone with this car radio, you are able to make, receive, reject and mute hands-free calls as well as listen to Bluetooth streaming music from your phone with keeping your hands on the steering wheel and your eyes on the road ahead, which can make your driving more convenient and more relaxing.
What are you waiting for? Just add this unit to your shopping cart if you like it. Good luck to you!
Recent Comments