It is commonly believed that with a more advanced car radio installed in your car, you are able to enjoy a more comfortable, convenient and more relaxing in-car life provided by this car radio. If you are going to make the replacement all by yourself, you can refer to a related installation guide. The following is a 2005 2006 2007 2008 2009-2011 TOYOTA YARIS car radio installation guide from Seicane. You can take it as a reference.
Before and during installation, you should notice:
1. Before connecting, please make sure the ignition is off to avoid short circuit.
2. Ensure connect the yellow and red power cable at last.
3. Ensure that all loose wires are isolated with electrical tape
4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5. Ensure that all ground is connected to the same place.
6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400
2005 2006 2007 2008 2009-2011 TOYOTA YARIS car radio installation guide
1. Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside.

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside
2. Remove screws that fixed the radio on the dashboard.
3. Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.

Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio
4. Unplug the connectors at the back of the factory radio.
5. Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure.

Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure
6. Put the new Seicane radio into your car, you should check whether your connections are correct, and you’d better have a tidy for the cables.
7. If everything is OK, firm screws into their original place.
8. Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio.

Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio
Wish the above installation guide can help you to some extent. If you have any doubts, you can seek help from your dealer, someone experienced or a professional. Besides, it is essential for you to check whether your new car radio fits well with your car or not. If you have no ideas, you can refer to a remarkable 2005 2006 2007 2008 2009-2011 TOYOTA YARIS car radio from Seicane. For more details, please click:
This car radio is compatible with a wide range of practical and entertainment features, so it can be regarded as one of the best choices to replace your factory radio. Thanks to the worldwide real-time GPS navigation system of this car radio, you are able to locate where you are and navigate to your desired destinations through text-to-speech guidance. And this unit’s dual zone function enables you to listen to your favorite music while navigating.
Wish this car radio be your loyal road companion. Good luck to you!
Recent Comments