In the past you may spend much money not only in purchasing a new car radio but also in asking a technician to install the new car radio. However, if you know how to install a new car radio by yourself, it will save you quite a little money. The following is a 2003 2004 2005 2006 2007 -2011 Porsche Cayenne car radio installation instruction from Seicane. If you have the same car model and plan to replace your factory radio, you can take this instruction as a reference to help with the car radio installation.

2003 2004 2005 2006 2007 -2011 Porsche Cayenne GPS Bluetooth after installation

2003 2004 2005 2006 2007 -2011 Porsche Cayenne GPS Bluetooth after installation

Tips about the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details:http://www.seicane.com/car-dvd-dismantling-device-srd-400

2003 2004 2005 2006 2007 -2011 Porsche Cayenne car radio installation instruction

1. Pry out the trim piece along the perimeter of the center dashboard with a lever.

Pry out the trim piece along the perimeter of the center dashboard with a lever

Pry out the trim piece along the perimeter of the center dashboard with a lever

2. Remove 2 screws holding the stereo in the dashboard frame (green arrows). Please note that there will be four screws in the cars with navigation.

Remove 2 screws holding the stereo in the dashboard frame (green arrows). Please note that there will be four screws in the cars with navigation

Remove 2 screws holding the stereo in the dashboard frame (green arrows). Please note that there will be four screws in the cars with navigation

3. Carefully take the factory stereo out of the dash. When removing the factory radio, please note that there are two locking tabs on the lower tray that can break easily.

Carefully take the factory stereo out of the dash. When removing the factory radio, please note that there are two locking tabs on the lower tray that can break easily

Carefully take the factory stereo out of the dash. When removing the factory radio, please note that there are two locking tabs on the lower tray that can break easily

4. Here is a close-up of the underside of the stereo. These two plastic fingers (green arrows) fit into the tabs on the top edge of the lower tray.

Here is a close-up of the underside of the stereo. These two plastic fingers (green arrows) fit into the tabs on the top edge of the lower tray

Here is a close-up of the underside of the stereo. These two plastic fingers (green arrows) fit into the tabs on the top edge of the lower tray

5. Press the tab (green arrow) on the antenna lead and pull it out of the stereo.

Press the tab (green arrow) on the antenna lead and pull it out of the stereo

Press the tab (green arrow) on the antenna lead and pull it out of the stereo

6. Pull out the connectors at the back of the stereo (green arrows). Note that some cars may have different setups based on the vehicle’s different years.

Pull out the connectors at the back of the stereo (green arrows). Note that some cars may have different setups based on the vehicle's different years

Pull out the connectors at the back of the stereo (green arrows). Note that some cars may have different setups based on the vehicle’s different years

7. Check all the accessories for the new Seicane car radio.

8. Connect the harnesses to the back of the new Seicane car radio.

9. Connect the Seicane car radio to your original car radio’s plugs. And put the new Seicane car radio back into the dash.

10. Install two screws and trim piece.

11. Turn on the new car radio and have a comprehensive test.

 

So now do you have a general understanding of the installation on a 2003 2004 2005 2006 2007 -2011 Porsche Cayenne car radio? If you encounter any problems you cannot deal with independently, please don’t hesitate to consult your dealer, communicate with someone experience or turn to a professional for help. Besides, before installation, you should select an ideal car radio for your car. If you don’t know which kind of car radios can fit your car, you can refer to the following link which is a 2003 2004 2005 2006 2007 -2011 Porsche Cayenne car radio from Seicane.

https://www.seicane.com/2003-2004-2005-2006-2011-porsche-cayenne-android-autoradio-bluetooth-dvd-player-support-gps-sat-nav-audio-auto-a-v-1080p-video-mirror-link-dvr-steering-wheel-control-stereo-upgrade-s32546f

This modern car radio is running on the most advanced Android 7.1.1 operation system and a powerful quad-core CPU processor to enhance its capabilities and performance, so it will provide its user with a much smoother, easier and faster operation experience. Besides, it comes with both practical and entertainment features, including the built-in 3D GPS navigation system, FM/AM radio, Bluetooth hands-free calls, Bluetooth streaming music, DVD player, AUX, file management, etc.

With the assistance of the worldwide real-time GPS navigation system, you don’t have to worry about getting lost. Through turn-by-turn direction and voice prompts, you can easily know your current locations and navigate to your desired destinations. And with dual zone function, this unit enables you to freely listen to your favorite music while navigating, and the music can automatically switch to GPS voice.

Wish you like this unit and good luck to you!

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>

Post Navigation