If you are an owner of 2006 2007 2008 2009-2013 Toyota Tundra, what kind of stereo will you choose to install in your car? As far as I am concerned, a car radio with a wide range of practical and entertainment features can bring you great convenience and enjoyment for your driving. Thus, you can choose such a multifunctional car radio and get it installed in your car. The following is a 2006 2007 2008 2009-2013 Toyota Tundra car radio installation guide from Seicane, which can be taken as your reference if you own the same or similar dashboard.
Before and during installation, you should notice:
1. Before connecting, please make sure the ignition is off to avoid short circuit.
2. Ensure connect the yellow and red power cable at last.
3. Ensure that all loose wires are isolated with electrical tape
4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5. Ensure that all ground is connected to the same place.
6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400
2006 2007 2008 2009-2013 Toyota Tundra car radio installation guide
1. The original car radio.
2. Pry around the panel on the left of the original car radio with a lever, and release it.
3. Remove the bottom pocket with your hands.
4. Remove the air conditioner control with a lever.
5. Remove four mounting screws holding the original car radio in place with a screwdriver as pictures below show.

Remove four mounting screws holding the original car radio in place with a screwdriver as pictures below show
6. Take the original car radio out of the dash with your hands.
7. Disconnect all connectors at the back of the original car radio.
8. Check all the accessories for the new Seicane car stereo.
9. Connect the harnesses to the back of the new Seicane car stereo.
10. Connect the Seicane car stereo to your original car radio’s plugs.
11. Turn on the new Seicane stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
12. Put the new Seicane stereo into the dash.
13. Put everything into their original place.
Wish you can get some help from the above installation guide. If you meet any problems you don’t know how to deal with by yourself, please don’t hesitate to seek help from your dealer, someone experienced or a professional. Or you can directly arrange a professional technician to help you install the new car radio. If you haven’t got an ideal car radio yet, you can refer to an amazing 2006 2007 2008 2009-2013 Toyota Tundra car radio from Seicane.
This car radio is running on the most advanced Android 8.0 operation system, a high-quality eight-core CPU processor and 4GB RAM as well as 32GB ROM. So with this car radio installed in your car, you can embrace a much smoother, faster and easier operation experience.
Thanks to the text-to-speech guidance provided by the high-end 3D GPS navigation system, you can easily know where you are and have the most suitable route option to reach any locations you would like to go to accurately. And you are able to freely enjoy your favorite music while navigating because of this unit’s dual zone function.
Through the wireless Bluetooth connection between your Bluetooth-enabled mobile phone and this car radio, both Bluetooth hands-free calls and Bluetooth streaming music are both available for you, which can add a lot of convenience and enjoyment to your driving.
If you like this unit, just add it to your shopping cart. Good luck!
Recent Comments