To enjoy a more entertaining life in a car, more and more people are choosing to upgrade their factory radio with a most up-to-date head unit for more features as well as high performance. Compared with a factory radio, you can enjoy integrated functions in one head unit which easily make your in-car life more convenient and enjoyable. If you are going to replace your factory radio with a 2008-2013 VW Volkswagen Scirocco head unit, this article would be helpful for you to install it in your car with a correct guide.
Precautions:
- Please apply the parking brake and remove the negative cable on the vehicle battery before the removal to ensure security.
- A lever and a screwdriver need to be prepared before the installation.
Please refer to the below step-by-step removal and installation instructions for 2008-2013 VW Volkswagen Scirocco head unit as a reference:
Step1: Remove the trim panel.
Please pry around the trim panel with a lever. While prying, please loosen the trim panel with your one hand. When the trim panel is loosened, please remove the trim panel off the dashboard and gently place it aside for further removal.
2008-2013 VW Volkswagen Scirocco head unit installation step 1
Step2: Remove the four screws on the radio.
Please unscrew the four screws which are holding the radio at four corners with a screwdriver. Then keep them well in a small box for the installation of a new head unit.
2008-2013 VW Volkswagen Scirocco head unit installation step 2
Step3: Take the factory radio out of the dash.
After the four screws are unscrewed, you can easily pull the factory out of the dash.
2008-2013 VW Volkswagen Scirocco head unit installation step 3
Step4: Disconnect the wiring harness.
Before you put the factory radio aside, please disconnect the wiring harness at the back of the factory radio.
2008-2013 VW Volkswagen Scirocco head unit installation step 4
Step 5: Connect the new Seicane head unit to the original wiring harness as the user manual or the wiring diagram shows.
Step 6: Turn on the new Seicane unit to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
Step 7: Put the new Seicane unit into the dash and install the four screws.
Step 8: Install the trim panel into its original place.
The above is all the installation guide for a VW Volkswagen Scirocco head unit. With you can get some help from it. If you think it too hard to understand, you’d better have it installed by a professional technician. To make sure you can upgrade your factory radio with success, you need to buy a head unit which can fit your car very well. The following link is a great head unit from Seicane for you as a reference.
With this upgraded in dash DVD player navigation system installed in your car, you can meet all your needs of a car stereo for your VW Volkswagen Scirocco. Built-in GPS navigation system, DVD/CD/MP4/MP3/MP2 player, Bluetooth hands-free calls and streaming music are all supported for you to have a safe and cheerful driving experience.
Wish this article can be helpful for you and you will have a good trip with this VW Volkswagen Scirocco head unit. Good luck!
Recent Comments