With the development of technology, at present most car radios are plug and play, so you don’t have to modify or cut any wires in your car during the installation. The installation process of a new radio is not so complicated that you can also try to install a new car radio by yourself under the guidance of a correct car radio installation instruction. The following step-by-step instruction about the installation of a 2007-2013 Alfa Romeo GT gps dvd car radio is provided for you as a reference if you plan to replace your factory radio on your own.
2007-2013 Alfa Romeo GT car radio after installation
Precautions for this installation:
1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.
2.Please make sure that all fastened wires are isolated with electrical tape.
3.Please make sure the ignition is off to avoid short circuit.
4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2007-2013 Alfa Romeo GT car radio installation instruction
1. Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside.
Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside
2. Remove screws that fixed the radio on the dashboard.
Remove screws that fixed the radio on the dashboard
3. Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.
Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio
4. Unplug the connectors at the back of the factory radio.
Unplug the connectors at the back of the factory radio
5. Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure.
Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure
6. Put the new Seicane radio into your car, you should check whether your connections are correct, and you’d better have a tidy for the cables.
7. If everything is OK, firm screws into their original place.
If everything is OK, firm screws into their original place
8. Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio.
Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio
If you have any problems, we suggest you ask a professional for help. Besides, if you don’t have an ideal radio to replace your factory radio, you can refer to a 2007-2013 Alfa Romeo GT gps dvd car radio from Seicane. For more details, please click:
http://www.seicane.com/alfa-romeo-gt-dvd-player-with-gps-navigation-radio-bluetooth-ipod-srd-8805-1
Loaded with the intelligent WinCE6.0 operation system and the newest 800MHz ARM11 processor, this unit can greatly enhance its capacities and performance to be the best replacement for your factory radio in 2007-2013 Alfa Romeo GT.
You will be provided with numerous advanced features, including the latest 3D GPS navigation, Bluetooth hands-free calls, Bluetooth streaming music, radio, RDS, USB/SD connection, steering wheel control, etc.
This unit comes with a 6.2 inch 16:9 800*480 digital HD TFT LCD touch screen, so you are able to enjoy the best display effect when you utilize it to play TV programs, videos, movies, etc. And you will also have a better view of the road ahead.
With the built in Bluetooth technology, you are allowed to have hands-free calls and stream music straight from your Bluetooth-enabled mobile phone. Please do remember to add this unit to your cart right now if you like it!
Recent Comments